Sigelei TMAX V5 (Blue)
SIGELEI Tmax V5 has improved features with bigger OLED
screen showing three display items at the same time and it can also charge your mobile phone.
It can deliver 3.0 to 6.0 Volts or 3.0 to 15.0 Watts.
-Material: stainless steel and aluminum
-Thread: 510 & ego thread
-3.0 to 6.0 Volt variable voltage (VV)
-3.0 to 15.0 Watt variable voltage (VW)
-Vaping time check
-Output voltage display
Operation of Tmax V5
-Press 5 times continuously to turn on the mod.
-Press 3 times to browse the menu when the screen has shut down.
-Choose the menu and wait 2 seconds to enter it; then set the item and wait for 2 seconds to save your setting.
-If there is no operation in 2 seconds, you will exit the menu automatically.
The menu has 9 different functions:
1. iNCREASE VOLTAGE
To increase the voltage from 3.0V to 6.0V in 0.1 Volt increments, or power from 3.0W to 15.0W in 0.5
*Select Voltage or Wattage in menu VOLT&POWER.
2. REDUCE VOLTAGE
To reduce the Voltage from 6.0V to 3.0V in 0.1 Volt decrements, or power from 15.0W to 3.0W in 0.5
*Select Voltage or Wattage setting in menu VOLT&POWER.
3. LOCK OUT
Disabling the button
The device can be disabled to prevent from unwanted firing by selecting ‘OUT OFF’.
When ‘OUT ON’ is selected then the device will work normally and atomizer will fire.
To check the resistance of the atomizer.
Switch LCD on/off
When ‘LCD:ON’ is selected, the LCD will display your settings when the button is pressed.
When ‘LCD:OFF’ is selected, the LCD will not display your settings when the button is pressed.
Select VV or VW
To choose between variable voltage and variable wattage.
Select RMS or MEAN voltage.
*RMS is recommended.
To charge the mobile phone
Connect the mobile phone to the Tmax V5 with a USB charger. Choose ‘Mobile OUT ON’, press for
10 seconds and it will charge the mobile phone. In this period, the LCD will show ‘Warning!’
and ‘No smoking’.
To stop charging, press for another 10 seconds and separate the mobile phone and Tmax V5.
Please make sure you have set Mobile Out OFF after charging, and only in this mode can you smoke.
1. Clean the thread after using in case of rusting and corrosion.
2. Do not reverse the battery in the tube.
3. Turn off Tmax when not using.
4. Do not use the protected batteries.
Error-code: : Short=short circuit of the atomizer
Low-V= under voltage
HHH= over voltage
*When the resistance of the atomizer is below 1.2Ω, the Zmax will not work.
*Use only one battery when vaping.
Write an online review and share your thoughts with other shoppers!